Daqarta
Data AcQuisition And Real-Time Analysis
Scope - Spectrum - Spectrogram - Signal Generator
Software for Windows
Science with your Sound Card!
The following is from the Daqarta Help system:

Features:

Oscilloscope

Spectrum Analyzer

8-Channel
Signal Generator

(Absolutely FREE!)

Spectrogram

Pitch Tracker

Pitch-to-MIDI

DaqMusiq Generator
(Free Music... Forever!)

Engine Simulator

LCR Meter

Remote Operation

DC Measurements

True RMS Voltmeter

Sound Level Meter

Frequency Counter
    Period
    Event
    Spectral Event

    Temperature
    Pressure
    MHz Frequencies

Data Logger

Waveform Averager

Histogram

Post-Stimulus Time
Histogram (PSTH)

THD Meter

IMD Meter

Precision Phase Meter

Pulse Meter

Macro System

Multi-Trace Arrays

Trigger Controls

Auto-Calibration

Spectral Peak Track

Spectrum Limit Testing

Direct-to-Disk Recording

Accessibility

Applications:

Frequency response

Distortion measurement

Speech and music

Microphone calibration

Loudspeaker test

Auditory phenomena

Musical instrument tuning

Animal sound

Evoked potentials

Rotating machinery

Automotive

Product test

Contact us about
your application!

Timing Sine Modulator Phase


Macro: TmModPhase

If you select Sine as the Timing Modulation Source, this control sets the modulator phase.

There is only one Sine source that is shared among Quant, Bias, and Shift modulators on any Stream, so changes in one dialog will change this value in the others. Although any that use the Sine source will have the same frequency and phase, you can use other streams as sources if you want different values.


Macro Notes:

Use Quant., Bias., or Shift. prefixes in addition to channel and stream prefixes to specify the modulator for the TmModPhase command.

For example, L.1.Quant.TmModPhase=90 will set Left Stream 1 Quant Modulator Phase to 90 degrees. TmModPhase=>1 will increment or TmModPhase=>-1 will decrement the current Modulator Phase by 1 degree. Only +/-1 degree steps are allowed with this command format.


Macro Notes:

L.1.AMmodPhase=90 sets Left Stream 1 AM Modulator Phase to 90 degrees. Alternatively, AMmodPhase=>1 increments or AMmodPhase=>-1 decrements the current Modulator Phase by 1 degree. Only +/-1 degree steps are allowed with this command format.


See also Timing Modulation, Random / Step Timing Dialog, Waveform Stream Controls.

GO:

Questions? Comments? Contact us!

We respond to ALL inquiries, typically within 24 hrs.
INTERSTELLAR RESEARCH:
Over 35 Years of Innovative Instrumentation
© Copyright 2007 - 2023 by Interstellar Research
All rights reserved