Voice Pattern Scroll

Controls: Sgram/PT Dialog >> Pitch-to-MIDI >> Setup

See Voice Pattern Overview.

The Velocity Pattern, Note Pattern and Chord Pattern for a given Voice Setup each hold up to 256 characters. Each character position is referenced by an index from 0 to 255, shown above the pattern area. Only 30 characters are shown at time, so the index line initially shows 0 to 29. The index line and patterns use a fixed-width font so that characters remain vertically aligned.

The main index line consists of the digits 0-9 repeated over and over, while just above each 0 is a single digit to show 10s. For positions 100 and above, a 100s digit appears above the 10s digit.

When you are editing any pattern you can use normal mouse or keyboard horizontal scroll operations to move around the pattern, and the index line and other patterns will scroll to match.

Alternatively, you may scroll the patterns at any time using the small left and right arrow buttons. Those at the left end of the index line move the patterns by single index positions; those at the right end move 10 positions at a time.

You will only be able to scroll over the range where there are characters present in at least one of the patterns (Velocity, Note, or Chord). If you try to scroll higher the right-scroll buttons will have no effect, indicating you are already at the current end of the patterns.

See also Voice Pattern Overview, Velocity Pattern, Note Pattern, Chord Pattern, MIDI Voice Setup Dialogs, Pitch-to-MIDI dialog, Pitch Track Toolbox - Overview